Mekaster Engineering Ltd

Industrial Elevator

Industrial Elevator
Mekaster make 400 Kg to 2000 Kg capacity rack & pinion type men & material elevator suitable for travel height upto 250 mtr

RANGE OF ELEVATORS

1) Permanent Elevators

Started from 400 kg pay load capacity suitable for inspection and maintainance of all industrial structures. By virtue of its inherent advantages and Safety features the Rack & Pinion Elevators are widely used in the industry and are best suited for all types of industrial applications which includes:

  1. Chimney
  2. Coal Handling Plant [CHP]
  3. TV TOWER
  4. Port & Cranes
  5. Preheater
  6. Silo
  7. Special Application
 
Click here to download catalogue

2) Construction Elevators

Stated from 1000 kg pay load capacity suitable for Construction purpose. By virtue of its inherent advantages and Safety features the Rack & Pinion Elevators are widely used in the industry and are best suited for all types of industrial applications which includes:

  1. Building
  2. Boiler
  3. Bridge Pylon
 
Click here to download catalogue
[CHECK OUR PRODUCT CATALOG FOR DIFFERENT PRODUCTS IN THIS CATEGORY]

WHY RACK & PINION SYSTEM ?
  1. No shaft is needed.
  2. No machinery room is needed.
  3. No ropes or sheaves are required.
  4. Suitable for external and internal application.
  5. Greater resistance to windy and hostile environment.
  6. Higher factor of safety.
  7. Low operation cost and minimum maintenance.
  8. Easy erection from the Cage roof.
SAFETY FEATURES

     Optimum safety for the operation of the Elevator is ensured by the following:

  1. Limit cams for automatic stop at top and bottom landings.

  2. Safety hooks to prevent the car from climbing off the mast or to prevent the pinions from disengaging from the rack in case a counter roller or guide roller on the car comes off.

  3. Heels on the machinery plate keep the pinion of the machinery and the safety device constantly engaged with the rack on the Elevator mast, in case a counter roller or a guide roller on the car comes off.

  4. Interlocks: The car and landing doors are both electrically and mechanically locked to ensure proper safety.

  5. Electro Magnetic Disc Brake: The non-driving end of the electrical motor is provided with an Electro Magnetic Brake which is normally in braked condition, and is only released when electric power is provided to the unit.

  6. Centrifugal Brake: The worm screw of the reduction gear box is equipped with a centrifugal brake to prevent the safety device from tripping, in case of power failure, the car has to be taken down to the ground under gravity. This device also acts as an additional back-up safety system.



  9. For more details please visit our website www.mekasterengineering.com

Company Info
Mekaster Engineering Ltd
INDIA
City
PANCHMAHAL
Province/ State
Gujarat
Country/ Region
INDIA
Company Contact: